Chicago Pneumatic TR 630, Инструкция по безопасности и эксплуатации

Страница: 22 / 36

Operation
The machine must always be operated at the highest
engine revs when vibration is used, the engine revs
switch (A) is then in po. Speed switch (B)
must be in the position for low speed.
A
B
C D
Operating with automatic vibration
Set the vibration toggle switch (C) in position AUTO.
Vibration is activated when the joystick is used and
the machine is operated at low speed. For the best
tractive force, the vibration direction is changed
automatically when the machine is operated
forwards or backwards.
Operating with manual vibration
Set the vibration toggle switch (C) in position MAN.
The starting position for engine speed switch (D) is
neutral position.
When the engine speed (D) is set to low, the
automatic vibration is stopped. Vibration toggle
switch (C) must be set to the intermediate position
when returning to high speed in order for the
automatic vibration to be resumed.
Vibration switch position
Vibration is clockwise.
Vibration is anticlockwise.
Control
♦ Forward operation:
Move the joystick forwards.
♦
Reverse operation:
Move the joystick backwards.
♦
Right operation:
Move the joystick to the right.
♦
Left operation:
Move the joystick to the left.
♦
Stop the machine and vibrator:
Release the joystick to stop the vibrator and the
machine will stop.
Contact sensor
There are two contact sensors (A) mounted on the
machine. If either of these are activated during
operation, operating in that direction is not possible.
It is possible to operate the machine in the opposite
direction until the contact sensor has been reset.
A
A
If the machine gets stuck in a trench
NOTICE The operating mode must only be used
if the machine gets stuck in a trench.
9800 1262 01a | Original instructions 22
TR 630, 850 Safety and operating instructions