Chicago Pneumatic TR 630, Инструкция по безопасности и эксплуатации

Страница: 20 / 36

A
System information
When the transmitter is turned on, the following
data will be shown on the display:
A
B
C
D
A.
Engine running hours.
B. Software version for the machine's ECU
(Electronic Control Unit).
C. Software version for the radio receiver.
D. Software version for the radio transmitter.
Description Symbol
Radio contact established between
transmitter and receiver.
Alarm, charging.
Alarm, low oil pressure.
Fault codes:
05: Tilt switch activated.
The front switch is located behind the
engine on the right side of the machine. The
rear switch is located on the left side of the
machine.
06: Rear contact sensor activated.
07: Front contact sensor activated.
Radio contact lost between transmitter and
receiver.
Transmitter connected via cable control.
Stopping the engine, Hatz
1. Set the vibration switch (A) to neutral position.
A
B
C
D
G
2. Set the speed switch (B) to low (tortoise).
3. Set the engine speed switch (C) to low.
4. Let the engine idle for a few minutes.
9800 1262 01a | Original instructions 20
TR 630, 850 Safety and operating instructions