Chicago Pneumatic TR 630, Инструкция по безопасности и эксплуатации

Страница: 28 / 36

7. Clean or replace the cartridge.
8. Assemble in reverse order. Check the seal insert
of the collar nut (D). Replace the collar nut if the
seal insert is missing. Ensure that the dust
extractor valve is correctly positioned
downwards.
See the engine manual for more information.
Checking the shock absorbers
1. Check all the shock absorbers (A) for cracks or if
they are exhausted. There are two shock
absorbers (A) on each side of the machine.
A
A
2. Change the shock absorbers (A) if they are
damaged.
Draining the water separator filter
1. Loosen the drainage plug (A).
A
B
2. Drain until the fuel is free from water. Collect
the fluid extracted in a fuel can.
3. Tighten the drainage nut (A) and loosen the
bleeding screw (B).
4. Pump with the hand pump (C) until the fuel is
free from air. Tighten the bleeding screw (B).
C
Checking battery connectors
♦
Clean the battery poles and cable shoes and apply
a coating of acid-free grease (Vaseline).
♦
Tighten the battery connections.
♦
Check the attachment of the battery.
Inspection and cleaning of
the engine air cooling
system
WARNING Scalding hazard
During maintenance there is a risk of scalding from
hot engine oil.
►
Always ensure that the engine is cold before
performing any maintenance.
1. Remove all air guides.
2. Clean all air guides as well as the entire air
cooling area including the cylinder head,
cylinders and cooling flanges. Blow through with
compressed air.
3. Check and adjust engine valve clearance.
9800 1262 01a | Original instructions 28
TR 630, 850 Safety and operating instructions