Page 5
SKU 97906
For technical questions, please call 1-800-444-3353.
Keep the equipment, engine, and sur-
13.
rounding area clean at all times.
Use the equipment, accessories, etc.,
14.
in accordance with these instructions
and in the manner intended for the
particular type of equipment, taking
into account the working conditions
and the work to be performed. Use
of the equipment for operations differ-
ent from those intended could result
in a hazardous situation.
Do not operate the equipment with
15.
known leaks in the engine’s fuel sys-
tem.
This product contains or, when used,
16.
produces a chemical known to the
State of California to cause cancer
and birth defects or other reproduc-
tive harm. (California Health & Safety
Code § 25249.5,
et seq.
)
When spills of fuel or oil occur, they
17.
must be cleaned up immediately.
Dispose of fluids and cleaning materi
-
als as per any local, state, or federal
codes and regulations. Store oil rags
in a bottom-ventilated, covered, metal
container.
Keep hands and feet away from
18.
moving parts. Do not reach over or
across equipment during operation.
Before use, check for misalignment
19.
or binding of moving parts, breakage
of parts, and any other condition that
may affect the equipment’s operation.
if damaged, have the equipment
serviced before using.
Many ac-
cidents are caused by poorly main-
tained equipment.
Use the correct equipment for the
20.
application. Do not modify the equip-
ment and do not use the equipment
for a purpose for which it is not in-
tended.
Service precautionS
Before service, maintenance, or
1.
cleaning:
turn the engine switch to its
a.
“oFF” position.
allow the engine to completely
b.
cool.
then, remove the spark plug
c.
wire(s) from the spark plug(s).
Keep all safety guards in place and in
2.
proper working order. Safety guards
include muffler, air cleaner, mechani
-
cal guards, and heat shields, among
other guards.
do not alter or adjust any part of
3.
the equipment or its engine that is
sealed by the manufacturer or dis-
tributor. Only a qualified service
technician may adjust parts that
may increase or decrease gov-
erned engine speed.
Wear ANSI-approved safety goggles,
4.
heavy-duty work gloves, and dust
mask/respirator during service.
Maintain labels and nameplates on
5.
the equipment. These carry impor-
tant information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
this generator provides unregu-
6.
lated power to the battery charging
outlet.
Incorporating an inline regu-
lator is strongly recommended. The
charging process must be monitored
at all times. The battery charging
output must not be used to power any
other device or charge any other type
