Check Point IP690 - Flash Based Sys, Руководство по установке

Страница: 73 / 118

Configuring Check Point IPSO with IP690 ADP Interfaces
Check Point IP690 Security Platform Installation Guide 73
Note
To delete an interface used by VRRP or IP clustering, you must first disable the feature
that uses the interface. This is why you deleted the VRRP configuration before you
installed the ADP module.
4.
Click a physical interface name.
Network Voyager displays the Physical Configuration page for that interface.
5.
In the Physical Status area, click the Delete check box.
6. Click Apply.
7. Delete the configuration information for the rest of interfaces that you removed by restarting
this procedure at
step 2 .
8.
When you have deleted the configuration information for all the interfaces that you
removed, click Save.