Check Point IP690 - Flash Based Sys, Руководство по установке

Страница: 20 / 118

1
Overview
20 Check Point IP690 Security Platform Installation Guide
Figure 3 Check Point IP690 Security Platform System Status LEDs
The location and definition of the status LEDs for the installed network interface cards (NICs) is
described in
Chapter 5, “Connecting PMC Network Interface Cards.”
The location and definition of the status LEDs for the installed ADP modules is described in
Chapter 6, “Installing, Using, and Replacing ADP Services Modules.”
Note
The Fault and Warning symbols in Table 4 are visible only if there is an alarm condition, as
specified.
Table 4 shows the system status LEDs and describes their meaning.
Table 4 System Status LEDs
Status Indicator Definition Symbol
Solid yellow Appliance is experiencing an
internal voltage problem.
Blinking yellow Appliance is experiencing a
temperature problem.
Solid red One or more fans are not
operating properly.
Power supply over temperature
fault.
Blinking green System activity indicator
00578
SLOT 2 SLOT 3
RESET
SLOT 4
1
2
3
4
AUX CONSOLE
Fault (red)
Warning
(yellow)
System OK
(green)
!
!