Check Point IP690 - Flash Based Sys, Руководство по установке

Страница: 17 / 118

Check Point IP690 Security Platform Overview
Check Point IP690 Security Platform Installation Guide 17
Check Point IP690 Security Platform Overview
Figure 1 shows the component locations for the IP690.
Figure 1 Component Locations Front View
Four-Port 10/100/1000 Ethernet NIC
The four-port 10/100/1000 Mbps Ethernet ports are located in slot 4. Figure 2 shows the layout
of the Ethernet ports and link LEDs. The top link LED represents the left-most port (port 1). The
remaining LEDs represent the remaining ports from top to bottom and left to right.
Note
The Ethernet ports are intended for management or high-speed traffic.
Figure 2 Four-Port 10/100/1000 Ethernet PMC Details
Caution
Cables that connect to the Ethernet NIC must be compliant with IEEE 802.3ab, Cat 5E,
or Cat 5 cables to prevent potential data loss.
00577
SLOT 1 SLOT 2 SLOT 3
RESET
SLOT 4
1
2
3
4
IP690
AUX CONSOLE
System status LEDs
AUX port
Console port
Four-port Ethernet
10/100/1000 (slot 4)
PC-card slot (slot 3)
PMC NIC slots (slots 1 and 2)
Reset button
00120a
RJ-45 connectors
LInk LEDs (green)
Port 2 Port 4 Port 1 Port 3