Page 16 of 20
EZpar™ 64 RGBA User Manual
IRC Operation
Note
: Make sure to point the IRC directly at the receiver on the front of the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the
product.
To turn on Automatic mode:
1. Press
<AUTO>
on the IRC.
2. Press
<+>
or
<–>
to choose between any different auto programs.
To adjust the speed of the automatic program:
1. Press
<SPEED>
on the IRC.
2. Press
<%>
.
3. Press
<+>
or
<–>
to either increase or decrease the speed of the
program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound Active mode:
1. Press
<SOUND>
on the IRC.
To adjust sound sensitivity in Sound-Active mode:
1. Press
<SENSITIVITY>
on the IRC.
2. Press
<%>
.
3. Press
<+>
or
<–>
to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC:
1. Press
<MANUAL>
on the IRC.
2. Press any number between
0
–
9
to choose your color (
0
= white (RGBA),
1
= red,
2
= amber,
3
= yellow,
4
= green,
5
= cyan,
6
= blue,
7
= magenta,
8
= orange, and
9
= amber).
To manually control the RGB percentage:
1. Press
<MANUAL>
on the IRC.
2. Press
<R>
,
<G>,
or
<B>
to choose your color.
3. Press
<+>
or
<–>
to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press
<STROBE>
on the IRC.
2. Press
<+>
or
<–>
to increase or decrease the strobe rate.
3. Press
<STROBE>
again to turn off the strobe.
To change the switching effect of the program:
1. Press
<FADE/SNAP>
on the IRC.
Fade will slowly switch the effect. Snap will rapidly switch the effect.
To black out the lights:
1. Press
<BLACK OUT>
on the IRC.
This will turn off all the lights until the button is pressed again.
Note
: The IRC will not respond to any inputs when Black Out is activated.
If the remote does not respond when a button is pressed, try pressing
<BLACK OUT>
. You may have inadvertently activated Black Out.
