EZpar™ 64 RGBA User Manual
Page 15 of 20
Static Colors
To select a preset static color, do the following:
1. Press
<MENU>
repeatedly until
C--
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select the desired preset color:
•
C 1
- Red
•
C 2
- Green
•
C 3
- Blue
•
C 4
- Amber
•
C 5
- Cyan
•
C 6
- Magenta
•
C 7
- Yellow
•
C 8
- White (RGB)
•
C 9
- Orange
•
C 10
- Light Green
•
C 11
- Violet
•
C 12
- Yellow
•
C 13
- Pink
•
C 14
- Light Blue
•
C 15
- White (RGBA)
4. Press
<ENTER>
.
Custom Color
Mixing
To custom mix a color, follow the instructions below:
1. Press
<MENU>
repeatedly until
U--
shows on the display.
2. Press
<ENTER>
and one of the following colors shows on the display:
rXXX
(red)
,
gXXX
(green),
bXXX
(blue) or
AXXX
(amber).
3. Press
<ENTER>
repeatedly to select the desired color.
4. Use
<UP>
or
<DOWN>
to select the desired color value (
0
–
100
).
NOTE
: Selecting
0
will turn the color off.
5. Press
<ENTER>
to select color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
Infrared Remote
Control
The EZpar™ 64 RGBA is fully compatible with the Infrared Remote Control (IRC) from
CHAUVET®. To enable use with the IRC, do the following:
1. Press
<MENU>
repeatedly until
SET
shows on the display.
2. Press
<ENTER>
and
ON
(turns on the infrared sensor) or
OFF
(turns off the infrared sensor) shows on the display.
3. Press
<UP>
or
<DOWN>
to select the desired option.
4. Press
<ENTER>
.
