Page 12 of 20
EZpar™ 64 RGBA User Manual
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The EZpar™ 64 RGBA uses up to 8 DMX channels in its 8-channel DMX mode, which
defines the highest configurable address to
505
.
If unfamiliar with DMX, download the DMX Primer from
www.chauvetlighting.com
.
To select the starting address, do the following:
1. Press
<MENU>
repeatedly until
4-CH
(for the 4-channel mode) or
8-CH
(for the 8-channel mode) shows on the display.
2. Press
<ENTER>
to activate the selected DMX personality and
d 1
–
d512
shows on
the display.
3. Use
<UP>
or
<DOWN>
to select the desired starting address.
4. Press
<ENTER>
.
