Page 10 of 20
EZpar™ 64 RGBA User Manual
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The EZpar™ 64 RGBA may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the
Technical Specifications
).
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
•
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13-mm hole, which is appropriate for
this purpose.
•
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
•
The double-bracketed yoke also serves as a floor support. When mounting the
product on the floor, make sure that the product and cables are away from people
and vehicles.
Mounting Diagram
Bracket
Adjustment
Knobs
Double-Bracketed
Yoke
Mounting Clamp
Safety Cable