MagikPar, 9*5-in-1
User Manual
Our MagikPar
light offers many possibilities to achieve very nice bright effects which you want. It is specially
designed for the stages, disco, night clubs etc. Please read the manual before operation.
A. SPECIFICATION
1.
Voltage: AC 100V~240V, 50 Hz/60Hz
2.
Power Consumption: 84W
3.
LEDs: 9*5-in-1 10W RGBWA
4.
DMX Channels: 5, 7, 9 CH
5.
Beam Angle: 25 degree
6.
Operation Mode: LED Display
7.
Control Feature: DMX mode, Master/Slave mode, Built-in programs, Auto running, Sound-active, Static color
8.
Working Temperature: -10
℃
~40
℃
9.
Power linking: 5pcs/110V 13pcs/240V
10.
Dimension: 263*295*88mm
B. OPERATION
This series of product has rich effect programs, easier operation, there are four working modes:
-
Built-in programs
-
Auto running mode
-
DMX mode
-
Slave mode
-
Sound active mode
-
Static color
1. Built-in Programs Mode
1) Press the “MODE” button, the fixture will enter into built-in programs mode menu “
”.
2) Press the “UP” or DOWN” button to select the effect programs “
—
”.
3) When the LED display shows “
”, press the “SETUP” button can allow the fixture enter into static color
editing environment. Press the “UP” or “DOWN” button can help to select the static colors (1.rgb, 2.—r, 3.--g,
4.—b, 5.-u, 6.—A, 7.-rg, 8.—rg, 9.-rb, 10.rb, 11.gb, 12.ru, 13.gu, 14.bu, 15.rA, 16.gA, 17.bA, 18.uA, 19.on, -OFF),
and then pleaser press the “SETUP” button to set the preset static color strobe “
”. You can adjust the strobe
