manualshive.com logo in svg

Chauvet Professional VIP DRIVE 10-5 Nova, Руководство пользователя, Страница: 31 / 57

Поделиться
Скачать
Chauvet Professional VIP DRIVE 10-5 Nova Скачать руководство пользователя страница 31

Page 27 of 53

VIP Drive 10-5 Nova User Manual Rev. 1

Operation

LED Screen Color

The LED Screen Color options set the gamma and color temperature of the overall output.

Gamma correction applies a non-linear function to the tonal ranges in the video before output, which 

balances the brightness and darkness of the resulting video. To set the gamma:

1. Access the 

More Settings

 menu.

2. Turn the 

<MENU>

 knob until 

LED Screen Color 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Gamma 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the gamma, from 

1.0–4.0

.

7. Press the 

<MENU>

 knob.

Color temperature refers to the overall warmth or coolness of the video display by defining maximum 

values for each LED color and adjusting their dimming curves to correspond. To select a preset color 

temperature:

1. Access the 

More Settings

 menu.

2. Turn the 

<MENU>

 knob until 

LED Screen Color 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Temperature 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to select a preset, from 

Standard

, 

Cool

, or 

Warm

.

7. Press the 

<MENU>

 knob.

To set a custom color temperature:

1. Access the 

More Settings

 menu.

2. Turn the 

<MENU>

 knob until 

LED Screen Color 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Temperature 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to select 

Custom

.

7. Press the 

<MENU>

 knob.

8. Turn the 

<MENU>

 knob to select which color value to alter, from 

R

 (red), 

G

 (green), or 

B

 (blue).

9. Press the 

<MENU>

 knob.

10. Turn the 

<MENU>

 knob to set the value of the selected color, from 

000–255

.

11. Press the 

<MENU>

 knob.

12. Repeat steps 8-11 until the color temperature is set as desired.

Output Frame Rate

To set the frame rate of the output:

1. Access the 

More Settings

 menu.

2. Turn the 

<MENU>

 knob until 

Output Frame Rate 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select the frame rate (in hertz), from 

23.98

, 

24

, 

25

, 

29.97

, 

30

, 

47.95

, 

48

, 

50

, 

59.94

, 

60

, 

71.93

, 

72

, 

75

, 

85

, 

100

, 

119.88

, or 

120

.

5. Press the 

<MENU>

 knob.

Layer Settings

The Layer Settings determine which video input source is assigned to which output layer and in what way 

the layers are arranged in relation to each other.

•

There are 3 layers: the Main Layer and 2 Picture In Picture layers.

•

The Main Layer is capable of combining 2 HDMI input sources, 2 DVI input sources, or two optical 

input sources together into an input source called 

Mosaic

.

To access the Layer Settings menu for each layer through the menu:

1. Press the 

<MENU>

 knob to access the menu.

2. Turn the 

<MENU>

 knob until 

Layer Settings 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select the layer, from 

Main Layer

, 

PIP1

, or 

PIP2

.

5. Press the 

<MENU>

 knob.

To access the Layer Settings for each layer through the buttons on the control panel:

•

Press 

<MAIN>

 to access the 

Main Layer

 menu.

•

Press 

<PIP1>

 to access the 

PIP1

 menu.

•

Press 

<PIP2>

 to access the 

PIP2

 menu.

Pressing one of the above buttons to access the menu for that layer automatically sets the 

Status of that layer to On.

Содержание VIP DRIVE 10-5 Nova


























































Отзывы:

Нет отзывов