manualshive.com logo in svg

Chauvet Professional VIP DRIVE 10-5 Nova, Руководство пользователя, Страница: 44 / 57

Поделиться
Скачать
Chauvet Professional VIP DRIVE 10-5 Nova Скачать руководство пользователя страница 44

Page 40 of 53

 Operation

VIP Drive 10-5 Nova User Manual Rev. 1

3D Mode

The VIP Drive 10-5 Nova can work with an external active shutter 3D system to output stereoscopic 

visuals. An active shutter system connected to and synchronized with the VIP Drive 10-5 Nova will control 

the shutter timing of compatible 3D glasses (when they switch between occluding the left or right eye), 

which renders the video displayed by the VIP Drive 10-5 Nova into 3D.

To access the 3D mode menu:

1. Access the 

Advanced Settings

 menu.

2. Turn the 

<MENU>

 knob until 

3D 

is selected.

3. Press the 

<MENU>

 knob.

To enable or disable 3D mode:

1. Access the 

3D Mode

 menu.

2. Turn the 

<MENU>

 knob until 

Status 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select from 

On 

or 

Off

.

5. Press the 

<MENU>

 knob.

3D Format

The 3D Format determines whether the alternating frames for either eye will be split in half and displayed 

Side-by-Side or Top-and-Bottom, or if they will display one after the other in Frame Sequential format.

•

Side-by-Side

: The display will be split vertically, with the left eye image on the left and the right eye 

image on the right. The 

Width

 of the layer will need to be half of the input source resolution width.

•

Top-and-Bottom

: The display will be split horizontally, with the left eye image on the top and the 

right eye image on the bottom. The 

Height

 of the layer will need to be half of the input source 

resolution height.

•

Frame Sequential

: The left eye image and right eye image will display one after the other.

To select the 3D Format:

1. Access the 

3D Mode

 menu.

2. Turn the 

<MENU>

 knob until 

3D Format 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select the format, from 

Side-by-Side

, 

Top-and-Bottom

, or 

Frame 

Sequential

.

5. Press the 

<MENU>

 knob.

Eye Priority

To select the Eye Priority of the 3D display:

1. Access the 

3D Mode

 menu.

2. Turn the 

<MENU>

 knob until 

Eye Priority 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select from 

Left 

or 

Right

.

5. Press the 

<MENU>

 knob.

Right Eye Start

To set the offset of the right eye frames:

1. Access the 

3D Mode

 menu.

2. Turn the 

<MENU>

 knob until 

More Settings 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Right Eye Start 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the offset, from 

0–8192

.

7. Press the 

<MENU>

 knob.

Signal Delay

To set the Signal Delay:

1. Access the 

3D Mode

 menu.

2. Turn the 

<MENU>

 knob until 

More Settings 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Signal Delay (µs) 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the delay, from 

0–20000

 (microseconds).

7. Press the 

<MENU>

 knob.

•

Because active shutter 3D technology requires double the frame rate to render a proper 

3D display, the output capacity of the VIP Drive 10-5 Nova will be halved when 3D mode 

is active.

•

The layer width or height may need to be halved, depending on the 3D Format setting.

Содержание VIP DRIVE 10-5 Nova


























































Отзывы:

Нет отзывов