Chattanooga Vectra Neo, Руководство пользователя

Страница: 23 / 86

21
Vectra® Neo Clinical Therapy System
SETUP INSTRUCTIONS
3. Place the Neo Head on the cart facing toward the
drawers.
4. Fasten the Neo Head to the cart using four screws to
connect the base to the Neo Head.
5. If desired, replace the closed Handles with the open
Handles. Each Handle is attached with four screws as
shown.
6. Reinstall the drawer.
The optional Therapy System Cart, PN 70001, is designed
for use with the Vectra® Neo Clinical Therapy System only
and allows the user to easily transport the System from
patient to patient within the clinic as well as store all
necessary accessories, supplies, and applicators used for
the various modalities of the System.
Tools required (not included): #2 Phillips screwdriver and
standard slotted screwdriver.
Remove the Vectra® Neo Clinical Therapy System from the
shipping carton. Visually inspect for damage. Report any
damage to the carrier immediately.
To assemble the Neo Head to the Cart, follow these steps:
1. Remove the top drawer from the Cart. Pull the drawer
open. Press the plastic tabs on both drawer slides
simultaneously in opposite directions, as shown. Pull
the drawer completely out.
2. Remove the base from the head unit prior to placing
it on the cart. Do this by removing the four screws
from the underside of the base where they secure to
the Neo Head. Retain for use when attaching the Neo
Head to the Cart.
HEAD TO CART ASSEMBLY