Chattanooga Vectra Neo, Руководство пользователя

Страница: 43 / 86

41
Vectra® Neo Clinical Therapy System
PATIENT PREPARATION
ULTRASOUND PATIENT PREPARATION
1. Examine the skin for any wounds and clean the skin.
2. View the Applicator recommendation in the
treatment.
3. Review screen for Ultrasound (as a reference point
only) prior to administering treatment.
NOTE: Applicators are available in the sizes shown
below:
Applicator Preparation and Use
1. Clean applicator before each therapy session with
warm soapy water.
2. Liberally apply Conductor™ Transmission Gel to the
treatment area on the patient.
• Move the Applicator during therapy session in a
circular motion. The area treated should be twice
the diameter of the Applicator.
3. If US Coupling is On, the Applicator is properly
coupled to the patient and administering ultrasound
when the LED is constantly illuminated. Coupling is
not available on the 1 cm
2 applicator.
For ULTRASOUND OPERATION, refer to page 51.
Preparing the Patient’s Skin for Laser Therapy
Before applying Laser therapy to the patient, you must
fi rst prepare the patient’s skin. By properly preparing the
patient’s skin for Laser therapy, you will allow more Laser
energy to reach the targeted areas and reduce the risk of
skin irritation.
To prepare the patient’s skin for Laser therapy, do the
following:
1. Thoroughly wash the skin on which you intend to
place the laser head with mild soap and water or
alcohol wipe.
2. Dry the skin thoroughly.
For LASER OPERATION, refer to page 56.
LASER PATIENT PREPARATION
1 cm
2
2 cm
2
5 cm
2
10 cm
2