Chattanooga Vectra Neo, Руководство пользователя

Страница: 25 / 86

23
Vectra® Neo Clinical Therapy System
SETUP INSTRUCTIONS
All modules are installed from the left side (when facing
the screen) of the Neo Head unit and are each installed
in the same manner. Each has color-coded lead wires
that correspond to the appropriate colored labeling on
the modules. Module-specifi c installation instructions
are shown after the generic instructions. To install the
modules in the Vectra® Neo Clinical Therapy System,
follow the steps shown.
Tools required (not included): #2 Phillips screwdriver and
standard slotted screwdriver.
The System is programmed to automatically recognize
the new Module(s), therefore, no software installation is
required.
Ultrasound Laser
Stimulation3/4 Stimulation 1/2
1. Ensure that the power cord is removed from the
device.
2. Remove the blank faceplate over the slot from the
left and right sides of the Neo head. (The example
displays the Ultrasound module.)
3. Insert a standard slotted screwdriver (not provided)
into the top slot, pressing down with slight pressure.
Pull the faceplate off (in this example showing
Electrotherapy Channel 3/4).
4. The module is inserted on the left side of the Neo
Head in the slot as shown in this example (with the
Ultrasound module).
5. Carefully insert the module into the slot, with 32 pins
(2x16) in first. Secure the module in place with gentle
pressure until you feel the module is seated.
MODULE INSTALLATION