5 . H O W t O P e r F O r M a t r e at M e N t, P e r F O r M a N c e c H e c k
42
EN
REVOLUTION WIRELESS™
5.7 ending the treatment
When the preset therapy time elapses:
• the device stops the therapy session automatically
• the intensity of all channels drops to 0.
You can stop a treatment as well by:
• activating the pause and returing to program selection
• turning the device completely off, by pressing the On/Off button of the remote control for more than 2
seconds.
To turn the unit off, press the On/Off button on the remote control for more than 2 seconds. This will
switch off all modules as well.
5.8 Performance check
If the unit can be operated as described above, the therapy unit has passed the performance check
successfully.
The device also runs performance checks regularly during operation.
This is what happens if a problem is identified (at start or during operation):
If there is a risk in usage or a malfunction identified:
• the device will ask you to correct it (see also Chapter “Problems and Solutions”)
• or automatically shut down immediately
In this situation, you may attempt to restart the unit by turning it briefly off and on again. With the unit
switched off, check that all plugs are correctly connected.
If the error message persists when the unit is switched on again have the unit inspected by an authorized
service technician before using it again.
Note
At the end of your stimulation session it is recommended to store the remote control and the
modules in the docking station to recharge the units.
