4 . d e V i c e S e t u P
34
EN
REVOLUTION WIRELESS™
4.3 Synchronization between remote and modules
Smart 4CH Docking station is able to synchronize any Revolution Wireless module(s) and remote(s)
plugged on it. Modules plugged on the station will be automatically synchronized and recognized by the
remote plugged as well on the station. The B button allows synchronizing Modules and Remote control
which is usually done automatically by the unit.
A
B
Warning!
The Revolution Wireless device may be susceptible to Electrostatic Discharge (ESD) at and
greater than ±15kV. In the event of such a discharge device may experience communication
loss between remote and modules. The device will terminate all active outputs,
automatically place the device in a safe state.
To recover from this, turn remote and all modules off and turn them on after 5 sec delay
using on/off switch on each. Once the device restarts, re-initiate all treatments.
The Revolution Wireless device may be susceptible to Radiated RF energy at and greater
than 10V/m. In the event of such exposure, the device may experience communication loss
between remote and modules. The device will terminate all active outputs, automatically
place the device in a safe state.
To recover from this, turn remote and all modules of and turn them on after 5 sec delay
using on/off switch on each. Once the device restarts, re-initiate all treatments.
