47
EN
REVOLUTION WIRELESS™
6.2.4 identify modules
The identify modules function allows you to allocate different colors to the different modules for an easier
identification of the channels during usage.
It can be activated and deactivated within the menu for the Settings at the Remote Control. Default
setting is: deactivated
To activate the function:
1. Select the function within the Settings menu of the Remote Control and press the center button. You
will be asked to turn ON ONE module.
2. Turn on one of the modules you want to match a color to.
3. Use the left and right arrows to select a color for this channel. The following colors are available: none/
red/green/blue/yellow
4. Allocate the chosen color to the activated module by pressing the confirmation button
. The screen
will show a green hook when allocation was successful.
5. Put the reflecting colored clip to this channel and clip it onto the cable of the module (remark: the best
positioning is close to the module with the on/off button).
6. Press the next button
to proceed with the process.
7. You will be asked to turn On ONE module again.
8. To allocate colors to more channels, please follow step 2 until 6 for each reflecting module.
9. When you finished the channel identification settings, press the back button
to return to device
settings.
When turning on a module and during the treatment, the screen will now show the reflecting color below
its intensity setting bar and in the header of the screen, in the order they had been turned on.
To deactivate the function again, please follow the steps 1 through 9 again, and set all modules to color:
none.
6 . t r e at M e N t O P t i O N S , F u N c t i O N S a N d d e V i c e S e t t i N G S
