Chassis Plans CPC1-17, Техническое описание

Страница: 65 / 70

Chassis Plans CPC1-C17, -C19 Technical Reference Appendix A – Display Serial Control Programming
Page 57
Table 31 - Advanced Controller Other Control
Function Command Description Acknowledge (if enabled)
Select RS-232
acknowledge 0xc1, “0” | “1” Disable/enable command
acknowledge. “0” – acknowledge disabled.
“1” – acknowledge enabled.
Auto-setup 0xc3 Start auto-setup of current
vmode.
“0” – fail.
“1” – successful.
Command
availability 0xc4, n Check whether a command is
available. “0” – not available.
“1” – available.
Auto-calibration 0xc5 Start auto-calibration of gain
of the RGB amplifier. “0” – fail.
“1” – successful.
Freeze frame
0xc6, “0” | “1”
Unfreeze / freeze frame
“0” – unfreeze.
“1” – freeze.
Soft Power On/Off 0xc8,
“0” | “1” |
“?” Soft power
off/on
query “0” – Turn off the LCD power and
backlight. Turn off memory
controller, Power down DVI
Power down ADC, Power
down Fclk PLL
“1” – Turn on the unit
Query video input
status 0xc9 Query the status of the
primary & pip status “nn,nn” = input status
“nn,xx” digit = primary status:
“0”,”0” : invalid
“A”,”1” ARGB
“B”,”1” Composite
“B”,”2” Composite2
“C”,”1” S-video
“C”,”2” S-video2
“D”,”1” SD Component
“D”,”2” SD Component2
“E”,”1” HDSDI
“E”,”2” HDSDI2
“F”,”1” DVI
“xx,nn”= PIP input status:
“0”,”0”: invalid
“A”,”1” ARGB
“B”,”1” Composite
“B”,”2” Composite2
“C”,”1” S-video
“C”,”2” S-video2
“D”,”1” SD Component
“D”,”2” SD Component2
“E”,”1” HDSDI
“E”,”2” HDSDI2
“F”,”1” DVI
Video de-interlace
method 0xca,
“0” | “1”
“r” | “R”
“?” De-interlace mode
Reset
Query “3” ”1”- enable AFM
“3” ”0”- disable AFM
“4” ”1”- enable TNR
“4” ”0”- disable TNR
“5” ”1”- enable MADI
“5” ”0”- disable MADI
“6” ”1”- enable LADI
“6” ”0”- disable LADI
Query BIOS
version 0xcb, “0” Read BIOS version BIOS version “VV.YY.ZZ”
VV = V0 or E0,
V0 = Release version
E0 = Engineering Sample
YY= Version Number