Chassis Plans CPC1-17, Техническое описание

Страница: 52 / 70

Chassis Plans CPC1-17, -19 Technical Reference Chapter 7 – 16-Port VGA KVM Programming
Page 44
Quick Hotkey Control
The Quick Hotkey can be toggled between [Num Lock] + [-], and [Ctrl] + [F12]. To toggle the Quick Hotkey :
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [H] .
After you press [H], the command line displays HOTKEY HAS BEEN CHANGED for one second; then the message
disappears and you automatically exit Hotkey mode.
OSD Hotkey Control
The
OSD Hotkey (see OSD HOTKEY , page 28) can be toggled between [Scroll Lock], [Scroll Lock] and [Ctrl],
[Ctrl]. To toggle the OSD Hotkey , key in the following hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [T] .
After you press [T], the command line displays
HOTKEY HAS BEEN CHANGED
for one second; then the
message disappears and you automatically exit Hotkey mode.
Port OS Control
A port’s operating system can be changed to match that of the computer attached to the port. To change a port’s
operating system, key in the following hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Key in [Function] , where [Function] refers to one of the function keys in the following table:
Key Description
F1 Sets the Port OS to
Wi d
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun
Table 24 – Port OS Control
After pressing a function key you automatically exit
Hotkey mode.
Restore Default Values
This administrator only hotkey restores the 16-port switch
default values. See
RESTORE DEFAULT VALUES
,
page 31. To restore the default values, key in the following hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press [R] .
3. Press [Enter] .
After you press [Enter], the command line displays RESET TO DEFAULT SETTING for three seconds; then the
message disappears and you automatically exit Hotkey mode.