Chassis Plans CPC1-17, Техническое описание

Страница: 10 / 70

Chassis Plans CPC1-17, -19 Technical Reference Chapter 1 - Introduction
Page 2
Genesis Based LCD Controllers
The LCD Controller is a key component in any display system
and no expense has been spared in specifying the Standard
Genesis controller. These are long life revision controlled
components. The Genesis chip set is the current gold standard
for LCD controllers. The controllers support 3x8-bit 16.7 million
colors scaled to 1280x1024 native panel resolution. Refresh
rates of 60Hz for UXGA and SXGA with higher refresh rates for
lower resolutions available. Computer input signals of VGA,
SVGA, XGA, and SXGA are supported. DVI inputs supports up
to 1280x1024 60Hz signals.
The Standard Controller provides up scaling. This allows input
scaling of virtually any lower-resolution input signal to scale the
image to the 1280x1024 native LCD panel resolution. They
provide for PC, Apple and Sun input resolutions.
The Standard Controller provides DVI-D inputs.
Friction Slides
Rugged General Devices friction slides have been specified.
Ball bearing slides are a weak point in any rackmount keyboard
design and the use of friction slides negates those problems.
Using friction slides allows the keyboard to stay at the position
you place it without the use of troublesome lock-outs. Friction
slides also have a very high tolerance for dust and dirt that
typically destroys ball bearing slides in very short order.
Included in the kit are rack adapter brackets allowing installation
into racks from 24- to 36-inch depth. Also included is all
required hardware to install the keyboard assembly into a rack.
Cage nuts are also supplied.
Miscellaneous Design Notes
1. Front Panel USB
The front panel USB port is not available on the unit with the 16-port KVM switch installed. There is no
room on the rear panel for the output port.
2. PS/2 Keyboard and Pointing Device
The PS/2 output signal for the Keyboard and Pointing Device is not available on the unit with no KVM
switch installed. This unit only supports USB.
Table 2 – LCD Controller Features