Chassis Plans CPC1-17, Техническое описание

Страница: 58 / 70

Chassis Plans CPC1-C17, -C19 Technical Reference Appendix A – Display Serial Control Programming
Page 50
Advanced Controller Serial Control Functions
The OSD functions are controlled through the following RS-232 or Ethernet commands.
The RS-232 program can be custom-tailored to fit the application or it can be used as provided by Chassis Plans
on request. Please contact Chassis Plans for additional information.
Table 29 - Advanced Controller Commands to Implement Switch Mount Control Buttons
Function Command Description Remark
Menu button 0xf7 Menu button pressed Button equivalent
Select-down
button 0xfa Select-down button pressed Button equivalent
Select-up button 0xfb Select-up button pressed Button equivalent
Right/+ button 0xfc Right/+ button pressed Button equivalent
Left/- button 0xfd Left/- button pressed Button equivalent
Table 30 - Advanced Controller Parameter Setting - Immediate, Relative, Reset and Query
Function Command Description Acknowledge (if enabled)
Volume control -
left+right channel 0x80, “a” | “A”,
nn | “+” | “-” |
“r” | “R” |
“?” Set audio (L+R) volume =
value/increment/decrement
Reset
Query volume
Range : “0””0”-“1””E”
Default : “0””F”
Volume control -
on/off (mute) 0x80, “m” | “M”,
“0” |
“1” |
“r” | “R” |
“?”
Disable audio output.
Enable audio output.
Reset
Query “0” - audio off (muted).
“1” - audio on.
Brightness control 0x81,
nn | “+” | “-” |
“r” | “R” |
“?” Set brightness =
value/increment/decrement
Reset
Query Brightness.
Range : “4””E”-“B””2”
Default : “8””0”
Contrast control -
all channels 0x82, “a” | “A”,
nn | “+” | “-” |
“r” | “R” |
“?” Set all contrast =
value/increment/decrement
Reset
Query Contrast
Range : “1””C”-“E””4”
Default : “8””0”
Saturation control 0x83,
nn | “+” | “-” |
“r” | “R” |
“?” Set saturation =
value/increment/decrement
Reset
Query PAL/NTSC color (In video mode
only)
Range : “0””1”-“F””F”
Default : “8””0”
Hue control 0x84,
nn | “+” | “-” |
“r” | “R” |
“?” Set hue =
value/increment/decrement
Reset
Query NTSC tint (In NTSC mode only)
Range : “5””3”-“9””F”
Default : “7””9”
Phase (tuning)
control 0x85,
nn | “+” | “-” |
“?” Set dot clock phase =
value/increment/decrement
Query Dot clock phase.
(In PC mode only)
Image H position 0x86,
nnnn | “+” | “-” |
“?” Set img_hpos =
value/increment/decrement
Query Image horizontal position.
(In PC mode only)
Image V position 0x87,
nnnn | “+” | “-” |
“?” Set img_vpos =
value/increment/decrement
Query Image vertical position.
(In PC mode only)
Sharpness 0x8a,
nn | “+” | “-” |
“r” | “R” |
“?”
Set sharpness =
value/increment/decrement
Reset
Query Sharpness.
(Video Mode Source only)
Range : “F””1”-“0””F”
Default : “0””0”