Chassis Plans CPC1-17, Техническое описание

Страница: 46 / 70

Chassis Plans CPC1-17, -19 Technical Reference Chapter 7 – 16-Port VGA KVM Programming
Page 38
F4: ADM
F4 is an administrator only function. It allows the administrator to configure and control the overall operation of the
OSD. To change a setting double-click it, or use the up and down arrow keys to move the highlight bar to it then
press
[Enter] .
After you select an item, a submenu with further choices to select from appears. Double-click an item, or move the
highlight bar to it then press
[Enter] . An icon appears before the selected item so that you know which one it is.
The settings are explained in the following table:
Setting Function
SET USER
LOGIN This function is used to set usernames and passwords for the administrator and users:
1. Usernames and passwords for one administrator and four users can be set.
2. After you select the administrator field or one of the user fields, a screen that allows you to
key in the username and password appears. Usernames and passwords can be from 1 to
16 characters long and can consist of any combination of letters and numbers (A–Z, 0–9)
and some additional keys (* ( ) + : - , ?. / space).
3. For each individual, key in the username and password, confirm the password, then press
[Enter] .
4. To modify or delete a previous username and/or password, use the backspace key to
erase individual letters or numbers. Press [Enter] when done.
Note: Usernames and passwords are not case sensitive. Usernames are displayed in capital
letters in the OSD.
SET
ACCESSIBLE
PORTS This function allows the administrator to define user access to the computers on the installation on
a port-by-port basis.
For each user, select the target port; then press the [Spacebar] to cycle through the choices: F (full
access), V (view only), or blank. Repeat until all access rights have been set, then press [Enter] .
The default is F for all users on all ports.
Note:

A blank setting means that no access rights are granted. The port will not show up on the
user's LIST on the main screen.

The administrator always has full access to all ports.
SET LOGOUT
TIMEOUT If there is no input from the console for the amount of time set with this function, the user is
automatically logged out. A login is necessary before the console can be used again.
This enables other users to gain access to the computers when the original user is no longer
accessing them, but has forgotten to log out. To set the timeout value, key in a number from 1–180
minutes, then press [Enter]. The default setting of 0 disables this function.
EDIT PORT
NAMES To help remember which computer is attached to a particular port, every port can be given a name.
This function allows the administrator to create, modify, or delete port names.
To edit a port name:
1. Click the port, or use the navigation keys to move the highlight bar to it, then press [Enter].
2. Key in the new port name, or modify/delete the old one. The maximum number of
characters allowed for the port name is 12. Legal characters include:

All alpha characters: A–Z

All numeric characters: 0–9

( ) + : - , ? . / and Space
Case does not matter; OSD displays the port name in all capitals no matter how they were
keyed in.
3. When you have finished editing, press [Enter] to have the change take effect. To abort the
change, press [Esc].
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to the original factory default settings
(see
OSD FACTORY DEFAULT SETTINGS ) except for the port name list, username and password
information, which are saved.
CLEAR THE
NAME LIST This function clears the port name list.