Chassis Plans CPC1-17, Техническое описание

Страница: 27 / 70

Chassis Plans CPC1-17, -19 Technical Reference Chapter 4 - Installation
Page 19
Connecting the Display
The CPC1-17 / CPC1-19 provide for one controller with rear panel details provided below.
Standard Controller Rear Panel Connections (No KVM Switch)
The Standard Controller provides for DVI-D and VGA inputs. In
addition, the rear of the display provides for Keyboard and Pointing
Device outputs plus a Circular Mil connector for power connection.
The keyboard with built-in pointing device offers universal output
providing USB and PS/2 outputs for the keyboard and ‘mouse’
devices.
The Standard Controller offers the following features:
Inputs:
Analog RGB: 60Hz at SXGA, WXGA, XGA, SVGA, VGA With
auto detect of Digital Separate Sync, Sync-On-
Green & Composite Sync. Auto detects VGA
~SXGA interlaced & noninterlaced.
DVI-D: 60Hz at SXGA, WXGA, XGA, SVGA, VGA
Image Scaling: Up scaling to fit input to native panel resolution of 1280x1024.
Image Control: Brightness, Contrast, Saturation, Hue, Frequency, Phase, Color temperature, Image position,
Hue, Gamma.
Other Features: Auto picture setup, Auto RGB calibration, Auto source seek, OSD timeout, OSD position,
Input source select, OSD menu lock, Direct key for brightness level adjustment.
Photo 5 – Standard Controller Rear Panel I/O
Legend Function Connector on KVM
USB Output Keyboard/Mouse USB Output USB Type ‘A’
Keyboard Output Keyboard PS/2 Output PS/2 - Locking
Mouse Output Mouse PS/2 Output PS/2 - Locking
DVI-D Input DVI-D Video Input DVI-D Connector
VGA Input VGA Video Input HD15 Female
12VDC Power Input Power, 12VDC +/-5% Circular Mil N/S 3102A-10SL-3P
Table 6 - Rear Panel Connections – Standard Controller
Note :
1. The Standard Controller offers remote serial port control through the RS232 Control Port. See Appendix
1 for details on port pin out assignment and commands.
2. The KVM Control connector is populated only on KVM enabled models.
Mouse
Output
USB
Output
Keyboard
Output
DVI-D
Input
VGA
Input
KVM
Control
12VDC
Power
RS232
Control
Port