Chassis Plans CPC1-17, Техническое описание

Страница: 63 / 70

Chassis Plans CPC1-C17, -C19 Technical Reference Appendix A – Display Serial Control Programming
Page 55
temperature nn | “+” | “-” |
“r” | “R” |
“?” value/increment/decrement
Reset
Query
Range : “9””C”-“F””F”
Default : “E””C”
Graphic horizontal
resolution enquiry 0xb7 Horizontal resolution (in pixels)
in 3 digit hex number “nnn” = horizontal resolution
Graphic vertical
resolution enquiry 0xb8 Vertical resolution (in lines) in 3
digit hex number “nnn” = vertical resolution
Graphic horizontal
sync frequency
enquiry 0xb9 Horizontal sync frequency (in
units of 100Hz) in 3 digit hex
number “nnn” = horizontal frequency
Graphic vertical
sync frequency
enquiry 0xba Vertical sync frequency (in units
of Hz) in 3 digit hex number and
1 char “nnnc” = vertical frequency
nnn = 3 digit hex
c= “i” or “p”
interlace or Progressive
0xba added the interlace(i)
or Progressive(p) feedback.
OSD status
enquiry 0xbb Status of OSD “0” – OSD turned off
“1” – OSD turned on
OSD turn off 0xbd Turn off the OSD. “1” – successful.
Set gamma data
for user defined
gamma curve 0xbf, mm, c, “?”
0xbf, “R” | “r”
0xbf, mm, c, nn Query gamma data for color c
index mm ( c = 0 for color Red,
c=1 for color Green,
c=2 for color Blue)
Set user gamma curve to linear
Set gamma data for color c
index mm. (If c= 3, then gamma
data for red, green & blue will be
set at the same time.) “nn” = gamma data
“1”
“nn” = gamma data
Backlight control 0xe0,
nn | “+” | “-” |
“R” | “r” |
“?” Set Backlight =
value/increment/decrement
Reset
Query Backlight.
Range:
D/A : “0””0” ~ “1””6”
100Hz : “0””0” ~ “8””A”
120Hz : “0””0” ~ “7””3”
140Hz : “0””0” ~ “6””3”
160Hz : “0””0” ~ “5””6”
180Hz : “0””0” ~ “4””D”
200Hz : “0””0” ~ “4””5”
220Hz : “0””0” ~ “3””E”
240Hz : “0””0” ~ “3””9”
260Hz : “0””0” ~ “3””5”
280Hz : “0””0” ~ “3””1”
300Hz : “0””0” ~ “2””E”
320Hz : “0””0” ~ “2””B”
340Hz : “0””0” ~ “2””8”
360Hz : “0””0” ~ “2””6”
380Hz : “0””0” ~ “2””4”
400Hz : “0””0” ~ “2””2”
420Hz : “0””0” ~ “2””0”
440Hz : “0””0” ~ “1””F”
Backlight On/Off 0xe1,
“0” | “1” |
“R” | “r”
”?”
“S” | “s” Backlight Off / Backlight On
/Status “0” – Backlight Off
“1” – Backlight On.
“?” – Backlight On/Off Query
“S”|”s” – Backlight Status Query
Color
Monochrome
mode selection
(Output Channel
0xe2
“0” | “1” | “2” | “3” |
| “4” | “5” | “6” |
“R” | “r”|
Off/
Blue Only/
Red Only/
Green Only/
“0” – Off
“1” – Blue Only
“2” – Red Only
“3” – Green Only