63
CET Electric Technology
Figure 3-32 Virtual Meter Setup Interface
3.2.4.5.5 Breaker Rating Setup
Click
Breaker Rating Setup
on the left-hand pane and the following screen appears on the right-hand
pane where the Breaker Ratings for the Mains and Branches can be configured. The Breaker Ratings are
used for calculating the % Loading Factors for the corresponding channels. Batch setup can be
performed at the bottom of the page by entering the Breaker Rating for each Branch circuit. Enter the
Breaker Ratings based on the actual situation. Click
Submit
to save your changes or click
Cancel
to cancel
your changes.
Notes:
1)
The range of the Mains breaker and Branch breaker rating is between 1 and 10,000A.
Figure 3-33 Breaker Rating Setup Interface
3.2.4.5.6 Alarm Setup
Click
Alarm Setup
on the left-hand pane and the following screen appears on the right-hand pane where
the Current Alarm, Voltage Alarm, Power Alarm, PQ Alarm, PF Alarm, Temperature Alarm, DI Alarm,
Phase Loss Alarm and Phase Reversal Alarm can be configured. Click
Submit
to save your changes or
Cancel
to cancel your changes. Please refer to
Section 4.3 Alarm Setpoints
for a more detailed
description.