page 9 of 30
3.4
Additional initial settings
You can turn the display (right-handed/left-handed users) with the
“+”
key
(page 4, fig. 1/3).
3.5
Display of saved therapy parameters
By pressing the
“SET”
key, the currently set parameters (initial setting) of the
unit are displayed. With first use you'll be shown the following initial settings:
The maximum output 100 mW the operation mode Multi and an energy dose
of 60 J/LD (LD = laser diode) are preset when operated for the first time.
Following this, the laser power values selected and stored previously will be
displayed as well as the therapy program and therapy dose used the last time.
Changing the laser parameters:
⚫
Chapter 6.0 “Changing
the
laser parameters” (pages
10)
Activating the laser:
⚫
Chapter 7.0 “Using the Laser” (page
s 14 - 16)
100mW 60 J/LD
MULTI
