page 10 of 30
4.
Changing the laser parameters
Press the SET key. The output value is blinking as highlighted in below figure.
Changes can be made by pressing
“+/
-
“
keys accordingly. Settings can be done
from 10 % to 100 % (in regard to the maximum value) in increments of 10 %.
Press the SET key again and the selected value is confirmed and stored. The
display changes; showing the following information.
The therapy program can be changed with the
“+”
and
“–”
(page 5, fig. 1/3) keys
and saved with the SET key.
The TESLA 21+ LASER SHOWER setting options are:
●
Multifrequency
●
ALPHA
● FI bands (FI: Pain,
Regeneration, Detox, Infection, Trauma,
Nerve)
● Sweeps (Sweep: Alpha,
Purr, Theta)
●
CW (Continuous Wave)
100 mW
30 J/LD
CW
