page 7 of 30
2.
Display and LED indicators
Software
V.x.x EU
This screen appears during the booting process after the
laser unit has been turned on. The second line indicates
the software Version - Status of the unit.
This screen appears after the laser unit has been turned
on after the booting process is finished.
The second line
shows the wavelength and the maximum CW output.
The loudspeaker icon indicates the sound is activated.
Tesla
808nm 21x100mW
100mW 15 J/LD
MULTI
Initial setting. The settings which were used last and
the current therapy parameters (laser power
(100mW)
,
therapy program
(Multi),
energy dose rate
(15 J/LD))
are
displayed. Factory setting when delivering is:
100mW *
Multi * 5 min (15 J/LD)
A value that appears inverted can be changed with the
“+”
and
“–”
keys. On this screen the laser power level can be
altered. Pressing the SET key saves the respective value.
Editing possible for:
◆
Therapy program
◆
Energy
dose
◆
and/or therapy time.
100 mW
30 J/LD
CW
Setting the therapy program from
“
CW
”
(Dark Blue
Selected)
Change with the
“+”
and
“–”
keys.
100 mW 30 J/LD
CW
100mW
30 J/LD
CW
Setting the energy dose
“
30 J/LD
“
(Dark Blue
Selected)
Change with the
“+”
and
“–”
keys.
100mW
10:00
CW
Setting the therapy time:
Maximum treatment time is
“
10:00
“
10 minutes.
(Dark Blue Selected)
Change with the
“+”
and
“–”
keys.
21x... mW/Mode
10:00 - 0,0 J/LD
This screen appears when the laser is activated.
Laser power level, remaining therapy time and
discharged energy dose rate in Joule (J) are
shown.
