page 21 of 30
13.
Error Messages and safety information
!
WARNING
!
Error in Laser-Diode Control.
If the error occurs repeatedly, please contact our
service team.
!
Adapter
!
Not detected
Adapter not attached, or not attached correctly.
Rectify error by attaching missing adapter, resp.
attaching it correctly.
21x100 mW
03:12 - 6.6 J
Temperature at laser diodes > 55 °C. If CW-mode is
active, the mode will be switched automatically to
"multi frequency".
Temperature at laser diodes > 60 °C. The area laser
will be switched off automatically.".
temperare
auto off
>60°C
Error in laser diode activation (Laser output too high).
When this message is displayed, the output emitted
varies from the output selected. Laser output still can
continue. This message may also occur due to
reflection of laser light on wet, reflective or mirror
surfaces (i.e. wet, sweaty, light or white skin or generally
heavily reflecting surfaces like light-colored metal
surfaces or glass). So, it does not necessarily indicate
an error of the device. Please make sure that no
reflective surfaces are being hit with laser light. Should
the error continue in spite of your precautions, please
contact our service.
!
WARNING
!
High Laser
Power
!
WARNING
!
Low Laser
Power
Error in Laser diode activation (Laser output too low).
Should this message be displayed repeatedly, most
likely a laser diode is defective.
Please contact our service.
