CENTURION SYSTEMS CLAWS, Руководство по установке

Страница: 132 / 168

page 132 www.centsys.com
Once assembled with the short drive arm, the format should look as shown in Section 15,
Figure 10.
1. The drive arm must point as is shown in Section 15, Figure 10
2. The notch must be at the bottom of the shaft (6 o’clock)
3. The bolt head must face the bottom and the nut on top
4. The angle of the bolt and nut must be as shown (1 o’clock)
STEP 9
Replace the bearing housing bolts once everything is in the correct orientation.
Hand-tighten for the time being.
FIGURE 10
1
3 4
2
VIEW A
1 o’ clock
6 o’ clock
LHS FLUSH MOUNT - SIMILAR DIRECTION OF TRAVEL SECTION 15