80
Technical instructions
Cm
-SOL
E7
TANK 3
UPPER SENSOR
E8
TANK 3
LOWER SENSOR
E9
TANK 4
UPPER SENSOR
E10
TANK 4
LOWER SENSOR
E11
BOILER 1
SENSOR
E12
BOILER 2
SENSOR
Possible cause:
interruption in el. wires between sensor and controller,
contact on the controller, cold connection or damaged sensor, set wrong
sensor type at configuration.
Controller status:
Controller works without tank that has sensor error.
Troubleshooting:
Check sensor installation position, check damage /
function of the sensor and cable, check connection contacts, check
sensor type (PT1000 or NTC), if there is availible free input set it for this
sensor and connect sensor.
Possible cause:
interruption in el. wires between sensor and controller,
contact on the controller, cold connection or damaged sensor, set wrong
sensor type at configuration.
Controller status:
Controller works without tank that has sensor error.
Troubleshooting:
Check sensor installation position, check damage /
function of the sensor and cable, check connection contacts, check
sensor type (PT1000 or NTC), if there is availible free input set it for this
sensor and connect sensor.
Possible cause:
interruption in el. wires between sensor and controller,
contact on the controller, cold connection or damaged sensor, set wrong
sensor type at configuration.
Controller status:
Controller works without tank that has sensor error.
Troubleshooting:
Check sensor installation position, check damage /
function of the sensor and cable, check connection contacts, check
sensor type (PT1000 or NTC), if there is availible free input set it for this
sensor and connect sensor.
Possible cause:
interruption in el. wires between sensor and controller,
contact on the controller, cold connection or damaged sensor, set wrong
sensor type at configuration.
Controller status:
Conventional heating source pump doesn't work.
Troubleshooting:
Check sensor installation position, check damage /
function of the sensor and cable, check connection contacts, check
sensor type (PT1000 or NTC), if there is availible free input set it for this
sensor and connect sensor.
Possible cause:
interruption in el. wires between sensor and controller,
contact on the controller, cold connection or damaged sensor, set wrong
sensor type at configuration.
Controller status:
Controller works without tank that has sensor error.
Troubleshooting:
Check sensor installation position, check damage /
function of the sensor and cable, check connection contacts, check
sensor type (PT1000 or NTC), if there is availible free input set it for this
sensor and connect sensor.
Possible cause:
interruption in el. wires between sensor and controller,
contact on the controller, cold connection or damaged sensor, set wrong
sensor type at configuration.
Controller status:
Conventional heating source pump doesn't work.
Troubleshooting:
Check sensor installation position, check damage /
function of the sensor and cable, check connection contacts, check
sensor type (PT1000 or NTC), if there is availible free input set it for this
sensor and connect sensor.
Errors