Technical information
sheet
MeteoR2
v3.2EN
5.2.5. FILTERING MENU
This menu gives access to the filtering function settings.
Screen
Function
MENU
AUTO
Use to select the filtering mode (see below).
Filtration P1
10:00 -> 18:00
Used to enter the times for the P1 filtering time slot.
• In PROG mode, filtering will run between these two times.
• In AUTO mode, filtering will start at the start time (10
o'clock in the example).
Filtration P2
18:30 -> 20:00
Used to enter the times for the P2 filtering time slot. In PROG
mode, filtering will run between these two times.
--:-- is used to disable the time slot.
Filtration P3
--:-- -> --:--
Used to enter the times for the P3 filtering time slot. This is
not displayed if the P2 filtering time slot is disabled (--:--)
• In PROG mode, filtering will run between these two times.
Pump calibration
Start
This screen is only displayed if pump current monitoring has
been activated and is used to calibrate the pump current.
Anti Frost
1.0°C
This menu is used to select the temperature below which
freeze protection is activated (0, 1 or 2°C). "Off" is used to
completely disable freeze protection.
www.c-
cei.fr
30
