Technical information
sheet
MeteoR2
v3.2EN
4. Installation
4.1. Control box mounting
The control box is fixed to the wall using the 4 included screws and wall plugs.
4.2. Remote control holder installation
The remote control holder is fixed to the wall using the 2 included screws and wall plugs.
4.3. Temperature sensor
The temperature sensor is moulded inside a part that screws directly onto a ½" fixing collar. A Ø
50mm collar is included with the accessories.
1.
Install the fixing collar on the discharge piping after having previously drilled it to Ø 20 ± 5mm.
2.
Screw the sensor into the fixing collar. (use Teflon tape to make sure it is watertight)
3.
Connect the sensor to the control box (see next page)
www.c-
cei.fr
12
