12
13
ON: SELECT LN34
BACK SAVE ON/OFF
9.
10.
11.
3 and 4 will be flashing. Use the keypad
to select the line or lines that will be
private. Selected numbers will be
displayed and flashing.
12.
13.
Press
PROGRAM
to exit.
NOTES:
■
Two or more stations can share the same private
line(s), but under this condition your private line calls
will always be accessible (always be privacy
released) to those stations.
■
If you have an SI-460 with Auto Attendant on, the
Auto Attendant station cannot answer lines that are
private.
OFF
BACK SAVE ON/OFF
ALWAYSRING: OFF
BACK CHANGE NEXT
AUTOANSWER: ON
BACK CHANGE NEXT
RINGER SELECT
BACK ENTER NEXT
AUTOANSWER: ON
BACK CHANGE NEXT
DATE (MM/DD)
BACK SAVE NEXT
7.
Press the soft key under “
CHANGE
” to
toggle between “AM” and “PM.”
8.
9.
“
DATE (MM/DD)
” will appear in the
display. Use the keypad to enter the
month (01-12) and the day (01-31). To
edit your entry, press the soft key under
“
BACK
” to re-enter the date.
10.
11.
12.
Press
PROGRAM
to exit.
PROGRAMMING
PROGRAMMING
AM/PM
BACK CHANGE NEXT
1/01 12:57
PM
PROGRAMMING THE TELEPHONE
DATE (MM/DD)
BACK SAVE NEXT
4/ 16 12:57
PM
3.
Once your selection appears in the display,
press
PROGRAM
to exit.
SETTING AUTOMATIC ANSWER
When auto answer is turned on and a station receives an intercom call, the station does not
intercom ring. Instead, the speakerphone automatically answers the intercom call.
To program the auto answer feature,
1.
Follow steps 1-6 above under “SETTING A
PRIVATE LINE.”
2.
Press the soft key under “
CHANGE
” to
toggle between “
ON
” and “
OFF
.”
TIME&DAY SETUP
BACK ENTER
TIME (HH:MM)
BACK SAVE NEXT
1/01 12:57
AM
2.
3.
4.
PROGRAMMING THE TELEPHONE
The SA-400 can be customized to meet your needs.
ASSIGNING A STATION EXTENSION NUMBER
1.
Press
PROGRAM
.
5.
6.
“
STATION 11 SET
” will appear in the
display.
NOTE:
■
If another station’s ID number is chosen, an error
beep will be heard and “
NOT AVAIL
” will appear in
the display. Press the soft key under “
CHANGE
to
select another extension number.
7.
Press
PROGRAM
to exit.
The LCD displays the time and day.
SETTING THE TIME AND DATE
1.
Press
PROGRAM
.
2.
3.
4.
“
TIME (HH:MM)
” will appear in the
display. Use the keypad to enter the hour
(01-12) and minutes (00-59). Your entries
will appear in the display as they are typed.
If the time entry is incorrect, press the soft
key under “
BACK
” to re-enter the time.
5.
The programmed time will then appear in
the display.
6.
TIME (HH:MM)
BACK SAVE NEXT
1/01 12:57
AM
PLEASE SELECT
PHON TIME OTHER
CALLER ID
BACK ENTER NEXT
SET STATION ID
BACK ENTER NEXT
SET STATION 11
BACK CHANGE SAVE
SET STATION 11
BACK CHANGE SAVE
Press “
CHANGE
” until the chosen
extension number (11-22) appears in
the display.
PLEASE SELECT
PHON TIME OTHER
SETTING A PRIVATE LINE
AUTO INTERCOM
BACK ENTER NEXT
FLASH: 600MS
BACK CHANGE NEXT
AUTODIAL SETUP
BACK ENTER NEXT
PLEASE SELECT
PHON TIME OTHER
PRIV LINE: OFF
BACK CHANGE NEXT
ON: SELECT LN34
BACK SAVE ON/OFF
1.
Press
PROGRAM
.
2.
3.
4.
5.
6.
7.
8.
You must share lines 1 and 2 with all other stations in the system. However, you can create a
non-square configuration as described on page 7 using lines 3 and/or 4, so that your station has
different telephone number(s) from the other stations lines 3 and/or 4. More than one station
can share a private line. CONFIGURE THE LINE CORDS OF YOUR SA-400 INTO THE
TELEPHONE LINES YOU WANT TO USE and follow the programming steps below.
Содержание SA-400
Страница 29: ...56 SA 400 FEATURES...
