6
7
Station ID
Department
Line Number
1
2
3
4
5
6
7
8
9
10
Station 11
Reception
X
X
X
X
Auto Attendant
Station 12
Marketing
X
X
X
X
Station 13
Marketing
X
X
X
X
Station 14
Sales
X
X
X
X
Station 15
Sales
X
X
X
X
Station 16
Customer Service
X
X
X
X
Station 17
Customer Service
X
X
X
X
Station 18
Warehouse
X
X
X
X
Station 19
Warehouse
X
X
X
X
Station 20
Accounting
X
X
X
X
Station 21
Accounting
X
X
X
X
Station 22
President
X
X
X
X
NON-SQUARE CONFIGURATION – PRIVATE LINE SUPPORT
As the diagram below illustrates, lines 1 and 2 are common to all stations and lines 3 through 10
are available to groups of stations, or departments. The sales stations, 14 and 15, each have
private lines, lines 8 and 9. The President also has a private line, line 10.
Calls to lines 1 and 2 can be transferred to all stations. Calls on line 3 can only be transferred to
all stations except stations 14 and 15. Calls on line 6 can only be transferred to the stations
which have that line, stations 12 and 13. Calls on line 7 can only be transferred to stations 20
and 21.
In this example, the auto attendant is station 11. Since the first 4 lines are available at the auto
attendant station, the auto attendant can only answer lines 1,2,3 and 4.
INITIAL SETUP
See page 13 to set a private line.
USING OTHER TELEPHONES WITH THE SA-400 SYSTEM PHONES
While standard telephones can share lines with the SA-400 system, features such as intercom
and call transfer are unavailable to the standard telephone. The line status indicators will be
activated by the standard telephones, but line privacy will not be maintained; a standard
telephone can join a call in the SA-400 system without the SA-400 station releasing privacy. An
SA-400 can access a call that the standard telephone is on after the standard phone has been on
a line for atleast 7 seconds. For more information on call privacy, see page 34.
CREATING YOUR UNIQUE SYSTEM
(cont.)
INITIAL SETUP
INITIAL SETUP
IDENTIFYING EXISTING WIRING
Thank you for purchasing Casio Communications’ SA-400 4-line fully customizable telephone
system. To fully take advantage of the SA-400’s robust system features and to ensure correct
installation, it is important to review and follow the owner’s guide carefully.
INITIAL SETUP
CREATING YOUR UNIQUE SYSTEM
If the installation site is currently wired with RJ11 jacks, it is recommended that you upgrade to
RJ14 jacks, available at your telephone supplier.
SYSTEM
A system is when there are more than one CASIO COMMUNICATIONS, INC. Executive Series
Phones and they all have line 1 connected and in common.
SYSTEM COMMUNICATION
For the system to operate, line 1 must be common to all stations. Using RF/IF technology, the
SA-400’s and SI-460’s communicate with each other using the wiring of line 1, without affecting
normal telephone operation. System information like station status and line use status is
communicated over this common wire along with up to two simultaneous intercom
conversations. The remaining lines, lines 2, 3 and 4 can be common to all or some of the
stations. If line 1 is disconnected, you can still make and receive phone calls but the unit will not
work as part of the system.
SQUARE CONFIGURATION
When all lines are all common, the configuration is called “square”. The chart below shows a
simple square configuration. Since all lines are common, calls on any line can be transferred to
any station.
If you are installing or having installed
telephone jacks, two RJ14 jacks are
recommended.
Line 1
Line 2
Line 3
Line 4
Station 11
X
X
X
X
Station 12
X
X
X
X
Station 13
X
X
X
X
Station 14
X
X
X
X
Station 15
X
X
X
X
Station 16
X
X
X
X
Station 17
X
X
X
X
Station 18
X
X
X
X
Station 19
X
X
X
X
Station 20
X
X
X
X
Station 21
X
X
X
X
Station 22
X
X
X
X
To properly connect the SA-400 to your
telephone lines, you must identify the type of
jacks available.
Содержание SA-400
Страница 29: ...56 SA 400 FEATURES...
