Casio KL-G2TC, Руководство пользователя

Страница: 54 / 73

52 EN
4.
Create a user character.
Function Operation
Move the cursor. Use arrow keys.
Make the dot at the current
cursor position black.
Press 1 (black).
x
This will cause 1
黑
(1 Black) to be
highlighted on the display.
Make the dot at the current
cursor position white.
Press 2 (white).
x
This will cause 2 白 (2 White) to be
highlighted on the display.
Draw a black line.
Press 1 (black) and then 3 (continuous), and
then move the cursor.
Draw a white line.
Press 2 (white) and then 3 (continuous), and
then move the cursor.
x
Drawing of diagonal lines is not supported.
x
After pressing 1 (black) or 2 (white), each press of 3 (continuous) enables or
disables continuous line drawing. While continuous line drawing is enabled,
3
連續
(3 Continue) is highlighted on the display.
x
While continuous line drawing is disabled ( 3 連續 (3 Continue) not
highlighted), you can perform the following operations to make the cursor
jump to one of the edges of the input area:
功能 + (left edge), 功能 + (right
edge), 功能 + (top edge), 功能 + (bottom edge).
5.
After creating a user character, press 執行 .
6.
Select the location where you want to save the user character and then
press
執行 .
x
If the location already contains a user character, the above step will
delete the existing character and replace it with the new one.
x
To cancel the user character save operation, press
取消
.
7.
Press 執行 .
Using an Existing Printer Character to Create a
User Character
You can create a user character based on an existing printer character.
x
You can also use a symbol (page APP-1) or a illustration (page APP-2) to
create a user character.
1.
Input the existing character you want to use and then align the cursor with
it.
2.
Press 功能 and then 造字 .
3.
Select
作成
(Make) and then press
執行
.
4.
Select 參考作成 (Use Input) and then press 執行 .
5.
Perform the steps from step 4 of the procedure under "Creating a User
Character from Scratch" on page 52.
Scale
↓
Scale
↓
Cursor