50
Inserting an Image into a Label
You can use either of following two methods to input an image into a label.
•
Inputting an image from a file
•
Capturing a PC screen image
Important!
•
To input an image into a label, you need to select print pattern
6
or pattern
7
(page 45), or a setting that is marked with
on the
Advanced Print
Pattern Settings
dialog box (page 46).
•
Even if you are inserting a color image, it is printed in monochrome in
accordance with the “Dithering”
settings. See page 53 for more information.
•
To view the actual print image, click
.
To input an image from a file
1.
On the main window, click the
button.
This displays the Image dialog box.
2.
Click
Open Image
.
3.
Select the file name of the BMP or JPEG image you want to input, and
then click
Open
.
This displays the selected image in color in the center of the
Image Settings
dialog box preview area.
4.
After making sure the preview shows the image you want, click
OK
.
Note that the layout preview image on the main window shows the image
you selected in monochrome.
Note
•
See page 53 for information about monochrome conversion dithering
settings.
Capturing a PC Screen Image
Perform the following steps to capture a screen image and insert it into a
label.
1.
On the main window, click the
button.
This minimizes the main window.
