Case CX130C, Руководство оператора

Страница: 92 / 282

3 - CONTROLS AND INSTRUMENTS
Preset 3 - long press Fast forward (while being
pressed)
Preset 4 - short press Next track
Preset 4 - long press
Rewind (while being
pressed)
Preset 5 Play/pause
Volume adjustment button Volume up
Volume adjustment button Volume down
Bluetooth
- Push the “MODE” button (8) to switch the audio source
until the message "BT" is shown on the display.
- Pair the Bluetooth device. For details on pairing, refer
to " Bluetooth Pairing"
- For details on how to use a mobile phone connected via
Bluetooth , refer to " Use of Cellular Phone Connected via
Bluetooth"
Button functions with Bluetooth selected as an audio
source:
Preset 3 - short press Previous track
Preset 4 - short press Next track
Preset 5 Play/pause
Volume adjustment button Volume up
Volume adjustment button Volume down
Bluetooth Pairing
NOTICE: To use Bluetooth audio devices, the devices to
be connected with a wireless connection must be regis-
tered in advance. This registration is called pairing. If a
device has never been paired, pairing must be performed.
1. With "BT" shown on the display, hold down the “AUTO
PRESET” button (5) . The "WA" message is shown on
the display and the unit proceeds to pairing prepara-
tion.
2. When pairing preparation is complete, the message
"PA" is shown on the display and the unit enters pairing
standby status.
3. Search for the device to pair such as a mobile phone
or a portable audio device.
4. When pairing is completed successfully, the message
"PO" is shown on the display. If pairing is not com-
pleted within a time limit (180 seconds) or an error oc-
curs, the message "P×" is shown on the display. If
pairing is failed, repeat from step 1 to perform paring.
Use of Cellular Phone Connected via Blue-
tooth
- When the paired cellular phone receives a call, the mes-
sage "CL" blinks on the display and the speaker will play
the ringtone. Even if the radio is switched off, it turn au-
tomatically on.
- To answer to the call, push any kind of radio button ex-
cept from the "POWER"
(1) and the volume buttons / .
- To reject a call, press the "POWER" button (1) . The
call is interrupted and the radio is restored to its previous
state.
- To adjust the speaker volume during the call, push the
volume adjustment buttons / . To turn on/off the micro-
phone, push the “PRESET” button
(6) .
- Push the "POWER" button (1) to terminate a call. The
radio is restored to its previous state.
- Hold down the “MODE” button (8) to redial. The mes-
sage "RE" is shown on the display for 3 seconds. After
redialling, the message "DL" flashes on the display and a
phone ring sound is played from the speaker.
Memory Erasure
Disconnecting the battery from the vehicle electrical cir-
cuit, the radio lose the stored radio stations in the Preset
buttons 1-6.
3-46