Case CX130C, Руководство оператора

Страница: 168 / 282

6 - MAINTENANCE
Hydraulic oil level
WARNING
Burn hazard!
Before performing any service on the hydraulic system, you must allow it to cool. Hydraulic fluid
temperature should not exceed 40 °C (104 °F).
Failure to comply could result in death or serious injury.
W0241A
Check the hydraulic oil level every 10 h or every day
Fluid: P
REMIUM
H
YDRAULIC
O
IL
HV46 M
ULTI
-G
RADE
A
NTIWEAR
1. Park the machine on a flat and level place, and arrange
the attachment as shown in the figure. Stop the engine,
and remove the starter key.
SMIL18CEX0485AA
1
2. Open the right-hand door, and check the indicator of
the hydraulic oil level. The oil level should be in the
middle of the band indicated by the two lines.
SMIL18CEX0486AA
2
3. If the hydraulic oil level is not in range proceed as fol-
lows:
• Release all pressure in the hydraulic tank. Refer to
page 6-8 .
• Clean the top surface of the hydraulic tank.
• Remove the cover of the suction filter, and supply
hydraulic fluid to the tank.
• If necessary, replace the seal of the cover plate, and
attach the cover of the suction filter.
NOTICE: make sure that no contaminant (water, sand etc.)
enters the reservoir during filling.
SMIL18CEX0487AA
3
6-18