Case CX130C, Руководство оператора

Страница: 182 / 282

6 - MAINTENANCE
Starting the engine with booster batteries
WARNING
Improper operation or service of this machine
can result in an accident.
An error connecting auxiliary starting cables or
short-circuiting battery terminals can cause an
accident. Connect auxiliary starting cables as
instructed in this manual.
Failure to comply could result in death or seri-
ous injury.
W0263A
Make sure that the booster battery voltage corresponds
to the voltage system of the machine
24 V .
Make sure that the starter key is in OFF position and
the gate lock lever in inward position.
Make sure to use supply cables of appropriate dimen-
sions (at least
50 mm² ( 0.1 in² ).
1. Connect one terminal of the positive jumper cable
(P) to the positive (+) pole of the machine batteries.
2. Connect the other terminal of the positive jumper
cable
(P) to the positive (+) pole of the booster
batteries.
3. Connect one terminal of the negative jumper cable
(N) to the negative (-) pole of the booster batteries.
4. Connect the other terminal of negative jumper ca-
ble
(N) to the upper frame of the machine (ground).
SMIL15CEX5131AA
5
Turn the starter key to ON position and start the engine.
After the engine has started proceed as follows:
1. Disconnect the terminal of negative jumper cable
(N) from the upper frame of the machine (ground).
2. Disconnect the other terminal of the negative
jumper cable
(N) from the negative (-) pole of the
booster batteries.
3. Disconnect the terminal of the positive jumper ca-
ble
(P) from the positive (+) pole of the booster bat-
teries.
4. Disconnect the other terminal of the positive
jumper cable
(P) from the positive (+) pole of
machine batteries.
6-32