5 - TRANSPORT OPERATIONS
CX130C with blade
Select the H work mode.
Align the machine to the trailer, so as the blade faces the
trailer ramps. Fully raise the blade.
NOTICE:
Starting from this position, the travel control
levers must be pushed forward to move on the ramps and
on the trailer bed. Confirm the travel control directions
before start moving onto the ramps.
SMIL20CEX0024AA
12
Slowly climb the trailer ramps. Slowly travel on the trailer
bed to reach the resting position.
SMIL20CEX0031AA
13
After reaching the resting position, lower the blade on the
supporting block.
Make sure that there is enough space between the block
and the tracks to route the tie-down chains.
SMIL19CEX2664AA
14
Slowly turn the upper structure
180°
.
SMIL20CEX0028AB
15
5-6
Содержание CX130C
