CloudMesh Satellite – NS-01
15 of 19
UG01221 v1.0 May 2020
© NetComm Wireless 2020
Appendix A – Safety Information
Please read before use:
LOCATION
This device is designed for indoor use only.
Place the device in a central location for the best WiFi
performance.
AIRFLOW
Do not restrict airflow around the device.
The device is air cooled and may overheat where airflow has
been restricted.
Always allow minimum clearance of 5cm around all sides and
the top of the device.
Do not cover, do not put in an enclosed space, do not put
under or behind large items of furniture.
Your device may become warm during normal use
ENVIRONMENT
Do not place this device in direct sunlight or any hot areas.
Safe operating temperature of this device is between 0° and
40°C
Do not allow this device to come in contact with any liquid or
moisture. Do not place this device in any wet or humid areas
such as kitchen, bathroom or laundry rooms.
POWER SUPPLY
Always use only the power supply unit that came with the
device. You should immediately stop using the power supply
unit if the cable or power supply unit is damaged.
SERVICE
There are no user-serviceable components in the device.
Do not attempt to disassemble, repair, or modify the device.
SMALL CHILDREN
Do not leave your device and its accessories within the reach
of small children or allow them to play with it. Your device
contains small parts with sharp edges that may
cause an injury or which could become detached and create
a choking hazard.
RF EXPOSURE
The device contains a transmitter and a receiver. When it is
on, it receives and transmits RF energy. The device conforms
with the radio frequency (RF)
exposure limits adopted by the Australian Communications
and Media Authority Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2014, when used at a
distance of not less than 20 cm from the body.
