CAS LP-2G, Руководство по обслуживанию

Страница: 37 / 104

9 Digital Filtering
29
< CAL: SYSTEM OPTIONS >
1. WEIGHT OPTIONS
2. NON-WEIGHT OPTIONS
3. KEYPAD OPTIONS
4. CLEAR MEMORY
5. SELECT COUNTRY
< CAL: NON -WEIGHT OPTIONS >
1. AUTO PRINT THRESHOLD
2. REPORT SETTINGS
3. DECIMAL PLACE SETTING
NUMERIC
< CAL: AUTO PRINT THRESHOLD >
Minimum Weight for Auto Print: [ 2]div
NUMERIC
< CAL: REPORT SETTINGS >
Print Null Sales? (Y/N) :[N]
Disable Takeup Motor? (Y/N) :[Y]
Auto Print Verify Labels? (Y/N) :[N]
8.2 Non-Weight Options
Once at the CAL Main
menu screen, press the 2 key. The
System Options Menu screen will
appear as follows. At the System
Options Menu screen, press the 2
key for Non-Weight Options.
The Non-Weight Options
Menu screen will appear as
follows:
8.2.2 Auto Print Threshold
Once at the Non-Weight
Options Menu screen, press the 3
key for Auto Print Threshold. The
Auto Print Threshold screen will
then appear as follows:
Min Weight: This determines how
much the weight must deviate in
order for PRE PACK to automatically print a label. This value is in divisions so on a 60 lb x 0.02lb Single
range LP-2, a value of 2 will cause an auto print if the weight deviates by
( 2 X 0.02 lb ) = 0.04 lb.
Remember, it must deviate by this much weight and then stabilize before it can print.
8.3 Report Settings
Once at the Non-Weight
Options Menu screen, press the 4
key for Report Settings. The Report
Settings screen will then appear as
follows:
Print Null Sales: This determines
whether all PLUs get reported (Y) or only active PLUs with sales get reported on (N). If you have 1000
PLUs programmed but only used 200 of them you might not want to get a report with 800 lines of zero
sales and then 200 lines of active sales.