CAS CI-400 Series, Руководство пользователя

Страница: 72 / 120

73
<Checker mode4> Relay Operation Graph upon Setting (F6.03-7)
1. Required set value input : SP2 > SP1
2. T3 : Refer to F6.06 (Delay time of judgment-relay output)
T4 : Refer to F6.07 (Operation time of judgment-relay output)
T5 : Refer to F6.08 (Operation(ON) time of weighing NG relay output)
3. This is the mode that judges via Hold Input
4. Relay Output
Step1 (LOW): During Hold Input, ON when Weight < SP1
Step2 (HIGH): During Hold Input, ON when SP2 < Weight
Step3 (OK): During Hold Input, ON when SP1 ≤
Weight < SP2
Lowest Limit NG: ON during Step1 Output, adjust Output Time on T5
Upper Limit NG: ON during Step 2 Output, adjust Output Time on T5
Near Zero : F1-23 set value ≥
Weight ≥ 0 range output
5. Status lamp in the front panel is operated in the same manner as the RELAY output.