Carver 38 super sport, Руководство пользователя

Страница: 89 / 162

3827 10/04
I
NTERNAL
S
YSTEMS
S
ECTION
4
When the waste tank is empty, turn the waste pump “OFF.” Operating the
waste pump when the waste tank is empty can damage the pump.
5. After all waste is pumped overboard, turn the waste pump switch
“OFF.”
6. Remove the waste tank deck plate labeled “WASTE” using the re-
moval tool supplied with your boat. This plate is located in the
forward starboard corner of the boarding platform. Refer to 9.7.2
Deck Plates for the exact location of this plate.
7. Flush the waste tank by pouring a few gallons of fresh water through
the “WASTE” deck fitting.
8. Reactivate the overboard discharge pump and remove the fresh
water and any remaining waste, then turn the pump “OFF.”
9. Close the overboard discharge seacock.
10. Replace the “WASTE” deck plate.
11. On the DC Control Center, switch the Forward Waste Pump circuit
breaker “OFF.”
4.6 Grey Water Holding System
Certain areas of the United States and Europe have initiated antipollu-
tion regulations that require the use of a grey water holding system on
boats.
When the optional grey water holding system is installed, all sink and
shower drain water, as well as condensation from the master stateroom
air conditioning unit, drains into a 56-gallon grey water tank rather than
directly overboard.
The two methods of emptying the grey water tank are described below.
Use waste tank deodorizer inside the grey water tank between
pumpouts.
4.6.1 Dockside Discharge
With the dockside discharge method, grey water is stored in the grey
water tank until it can be transferred to a dockside pumpout station. To
empty the tank:
1. Locate a dockside pumpout station.