Carver 38 super sport, Руководство пользователя

Страница: 130 / 162

M
AINTENANCE
3827 9/04
S
ECTION
7
7.3.6 Plexiglass
Do not use glass cleaners, abrasive cleaners, or aromatic solvents on
plexiglass. Doing so etches the plexiglass.
The shower door, mirrored face of the head medicine cabinets, and other
areas of your boat are made of plexiglass. Clean plexiglass with a solu-
tion of fresh water and mild liquid detergent. Remove any fine scratches
with a fine automotive acrylic rubbing and polishing compound.
7.4 Mechanical Systems
The following paragraphs explain how to maintain your boat’s propul-
sion, electrical, fresh water, bilge and sanitation systems.
7.4.1 Engines/Generator
Refer to the engine and generator OEM information for instructions on
maintaining your boat’s engines and generator. There may be a seawater
strainer installed in the water intake lines for each engine and the
generator. At least once every 30 days, close the seawater seacocks, then
open and clean the strainers. Refer to 9.7.4 Engine Room for the exact
location of the strainers. If you are operating the boat in dirty waters or
areas with a high degree of aquatic vegetation, inspect the strainers
more frequently. A clogged strainer restricts the intake of seawater
which can cause the affected engine or the generator to overheat.
7.4.2 Thru-Hull Valves
Inspect the thru-hull valves on a monthly basis. Make sure the connec-
tions between the hose and the valve are tight. Look for water leaks
around the area where the valve and hull meet. Every 30 days open and
close each valve two or three times. This guards against the valve seizing
in the open or closed position. While doing this make sure the valve
handle is securely fastened. Tighten any loose handles. Refer to 9.7.3
Thru-Hull Fittings for the location of the thru-hull valves.
7.4.3 Propeller Shaft Seals
Make sure the engines are OFF before inspecting the propeller shaft
seals. The engine room contains moving, hot machinery. Keep your
hands, feet and body out of the engine room while one or both engines
are operating.