Carver 38 super sport, Руководство пользователя

Страница: 139 / 162

3827 8/04
W
INTERIZATION AND
S
TORAGE
S
ECTION
8
You must use a nontoxic, non-alcohol, RV-type (pink) antifreeze in your
boat’s raw water washdown system. Using the wrong type of antifreeze
can damage the raw water washdown system. The repair of such damage
is not included under the terms of the Carver Limited Warranty.
3. Place the disconnected hose end into a bucket that contains about a
gallon of nontoxic recreational vehicle antifreeze.
4. Remove the hose from the transom raw water washdown fitting.
5. Place a bucket under the washdown fitting to catch the antifreeze,
which can be reused.
6. Turn the “house” battery bank master disconnect switch to the “ON”
position.
7. On the DC Control Center, switch the DC Main circuit breaker
“ON,” then switch the Washdown Pump circuit breaker “ON.”
8. When a steady stream of antifreeze flows from the washdown fitting,
switch the Washdown Pump circuit breaker “OFF.”
9. Reconnect the hose to the washdown fitting.
10. Reconnect the hose that was disconnected in Step 2.
8.3.6 Bilge
Refer to 4.4 Bilge System for a description of your boat’s bilge system.
1. Open the hull drain. Leave the drain open while your boat is in
storage.
2. Remove all water from the bilge.
3. Clean the bilge as described in 7.4.8 Bilge System.
8.3.7 Sanitation System
Before performing this procedure on the sanitation system, your boat
should be pulled from the water. Refer to the OEM information for more
information on winterizing the sanitation system.
Refer to 4.5 Sanitation System for a description of your boat’s sanita-
tion system.